Sprinter Motor Home FINISHED: So For sanity and mine, this will be the last and hopefully, best post covering the build of my Sprinter Twin Hobie PA 14 Motor Home Build / Campervan. 1st: I
Continue ReadingCategory: Mercedes Sprinter Twin Pro Angler 14 Motor Home Build
Sprinter Motor Home Build 3LTR V6 AUTO
As myself and Jack kayak together, we have the issue I’m sure many others have. Which is trying to transport two Hobie pro angler 14 kayaks in, on or behind one vehicle.
This is for many reasons including the cost of trips, reducing wear and tear on vehicles, not spending hours and hours on the road in separate vehicles which is boring as hell, etc…
So we set about building and trying many different methods to see which worked best, was the most user friendly and hassle-free.
These will all be covered in full. Click below
KAYAK TRANSPORTATION
So after trying many different methods and finding some annoying niggly issues. I decided I would buy the biggest van I could and build a campervan that would house two Pro Angler kayaks INSIDE. Keeping them warm, dry safe, and sound.
AND
CRUCIALLY NOT LIFTING THEM ON TO A ROOF RACK!!!
Sprinter Motor Home Build
So I will try and cover as best I can with the pictures I have taken. I am not trying to teach “HOW TO” install things but instead just what I have done and where I have put things. Trying fit everything in around our two very large kayaks, whilst still having some room to live for two people. I hope by sharing my build, people might get some IDEAS and INSPIRATION to build there own and make their life easier and warmer in the winter.
Tight lines…
Thanks, Harley ProAnglerKayak.Fishing…
Sprinter PA 14 Motor Home Build (Mattress no.2, trim, Edging, rear doors, Heating Digi Stat, Drawers, Storage, Varnish, Fake Grass Floor, Bits & Bobs)
Sprinter PA 14 Motor Home part 10: As Im nearing the end of this build I had lots going on at once so the pictures might be better than the description. After fitting the first
Continue ReadingSprinter PA 14 Motor Home Build (More lights, curtains rear storage shelf cladding, toilet, cladding, painting, varnishing, other bits and bobs, mattress)
Sprinter PA 14 Motor Home part 9: So here we are getting close to the end of the build. this van was finished some time ago but due to work, family and wanting to fish
Continue ReadingSprinter PA 14 Motor Home Build (skylight trim, lights, cladding, cladding and more cladding, solar panel kit and charger)
Sprinter PA 14 Motor Home part 8: Starting this part of the build on the Sprinter Motor Home we will go straight in with cladding: I wanted to clad as much of the van as
Continue ReadingSprinter PA 14 Motor Home Build (Blach Rhino Arsenal Alloys, BFGoodrich Ko2 Tyres, Fiamma F65 Eagle Awning, Second Skylight)
Sprinter Motor Home part 7: Continuing with the motor home build, a couple of costly purchases were much needed and could not be put off much longer. The tyres that were in the van when
Continue ReadingSprinter PA 14 Motor Home Build (Thetford duplex oven, Cladding, Armaplate, 230v Fuse Box and Wiring, 230v Battery Charger and Fridge Power, Underslung LPG Tank, Propex HS2000 LPG Heater)
Sprinter Motor Home part 6: Moving on with the sprinter build: Next, I had to install the oven. I purchased a Thetford Duplex oven, without grille as I had a single hob build into the
Continue ReadingSprinter PA 14 Motor Home Build (Cab Storage Shelf, Filling, Sanding, Painting, Extra Speakers, Smev 8821 Sink)
Sprinter Motor Home part 5: Continuing on from my last post, we are up to the point in the build at which I was starting to worry a little about the space (or lack of
Continue ReadingSprinter PA 14 Motor Home Build (Fitting Skylight, Android Head Unit, Shelving, Armaplate security)
Sprinter Motor Home part 4: After a few more parcels had arrived whilst I was at work. I had the next lot of items needed to continue with this build. First off my 600mmx 400mm
Continue ReadingSprinter PA 14 Motor Home Build (Windows Frames, Insulation Roof Lining, Fitting Batteries, and More)
Sprinter Motor Home part 3 Next, I had the fun job of trying to work how to make a neat job with the windows… The windows in this van are factory fit and have no
Continue ReadingSprinter PA 14 Motor Home Build (Insulating The Walls and Building The Kayak Storage Boxes and More)
Sprinter Motor Home part 2 On completing the previous works. It was time to get on with insulating the walls. Then start building the storage boxes for our Hobie Pro Angler 14’s After the soundproofing
Continue Reading